1.2 KiB
1.2 KiB
Modules are the building block through which Verilog is built.
Each module can be thought of as a black box with a series of inputs, and a series of outputs. Changing the input changes the outputs.
Module definitions are started with the module keyword, and closed with the endmodule keyword.
Syntax
The general syntax of a module is as follows:
module <name> ([port_list]);
// Contents of the module
endmodule
// The port list is optional
module <name>;
// Contents
endmodule
Below is an example of the structure of a half adder module:
module half_adder(
input a,
input b
output sum_bit,
output carry_bit
);
// ------- snip ------------
endmodule
Ports
Ports are a set of signals that act as input and outputs for a particular module.
There are 3 kinds of ports:
input: Input ports can only receive values from the outside.inputports cannot be written to.output: Output ports can be written to, but not read from.inout: Inout ports can send and receive values.
Port types
If no type is defined, ports are implicitly defined as nets of type wire.
In verilog, the term net refers to network, and it refers to a connection that joins two or more devices together.