19 lines
847 B
Markdown
19 lines
847 B
Markdown
To port forward with RouterOS, you need allow the port through the firewall, *and* actually forward traffic
|
|
# Allow through the firewall
|
|
1.
|
|
2. Set `Dst. Address` to the internal IP you want to allow traffic to
|
|
3. Set `Protocol` to `6 (tcp)`
|
|
4. Set `Dst. Port` to the port you want to allow traffic through
|
|
5. Set `In. Interface List` to `all` (I'm sure this isn't the most correct option), but it works
|
|
6. Set `Action` to `accept`
|
|
7. (Optionally) add a comment expaianin
|
|
# Forward traffic
|
|
1. Navigate to IP > Firewall > NAT, select `Add New`
|
|
2. Set `Chain` to `dstnat`, set `Protocol` to `6 (tcp)`
|
|
3. Set `Dst. Port` to the port you want to forward
|
|
4. Set `In. Interface List` to `WAN`
|
|
5. Set `Action` to `dst-nat`
|
|
6. Set `To Addresses` to the internal IP you want the traffic to go to
|
|
7. (Optionally) add a comment explaining what you're doing
|
|
|