21 lines
1.0 KiB
Markdown
21 lines
1.0 KiB
Markdown
To port forward with RouterOS, you need allow the port through the firewall, *and* actually forward traffic
|
|
# Allow through the firewall
|
|
1. Navigate to IP > Firewall from the sidebar, then go to the Filter Rules tab from the top
|
|
2. Select `Add New` to create a new rule
|
|
3. Set `Dst. Address` to the internal IP you want to allow traffic to
|
|
4. Set `Protocol` to `6 (tcp)`
|
|
5. Set `Dst. Port` to the port you want to allow traffic through
|
|
6. Set `In. Interface List` to `all` (I'm sure this isn't the most correct option), but it works
|
|
7. Set `Action` to `accept`
|
|
8. (Optionally) add a comment explaining what you're doing
|
|
# Forward traffic
|
|
1. Navigate to IP > Firewall from the sidebar, then go to the NAT tab from the top
|
|
2. Select `Add New` to create a new rule
|
|
3. Set `Chain` to `dstnat`, set `Protocol` to `6 (tcp)`
|
|
4. Set `Dst. Port` to the port you want to forward
|
|
5. Set `In. Interface List` to `WAN`
|
|
6. Set `Action` to `dst-nat`
|
|
7. Set `To Addresses` to the internal IP you want the traffic to go to
|
|
8. (Optionally) add a comment explaining what you're doing
|
|
|