21 lines
1.5 KiB
Markdown
21 lines
1.5 KiB
Markdown
There are two categories of stropping, stropping on a clean substrate, and stropping on a substrate with compound.
|
|
|
|
Stropping is done to reduce the width of the edge, and to help remove and align any burrs along the edge.
|
|
# Clean Stropping
|
|
Stropping on a clean substrate achieves 4 things:
|
|
1. It realigns the edge
|
|
2. It burnishes the metal (moves it without destroying it), making the edge smoother
|
|
3. Abrasion - It makes scratches less defined and smooths out the blade
|
|
4. Removes coating - Some blades come with a manufacturer applied oil, you can use a strop to remove this coating
|
|
|
|
# Loaded Stropping
|
|
With a loaded strop, abrasive compound is applied to the strop to increase the rate of abrasion. This compound is applied with the goal of reducing the width of the edge without the formation of a foil-edge burr. Loaded stropping tends to produce a micro-convex edge, meaning it's shaped a little bit like a teardrop, where it curves outwards from a straight angle the farther away from the vertex the edge goes.
|
|
|
|
The effect of stropping happens quickly, within 3-30 laps, and 10 laps being the minimum needed to achieve the desired effect. Stropping past 30 achieves minimal change, and stopping past the hundreds may introduce a burr again.
|
|
## Strop Material
|
|
There are a variety of stropping materials available for use, common materials include leather, denim, newspaper, washcloth, and balsa wood.
|
|
|
|
## Compound material
|
|
### Chromium Oxide
|
|
Chromium Oxide (green, waxy substance)
|