vault backup: 2024-10-21 09:38:49

notes/Stronger 3d printing.md

@@ -0,0 +1,11 @@
+- https://www.ankermake.com/blogs/guides/how-to-make-3d-prints-stronger
+- https://blog.prusa3d.com/how-to-improve-your-3d-prints-with-annealing_31088/
+- https://markforged.com/resources/blog/joinery-onyx
+- https://bigrep.com/posts/gyroid-infill-3d-printing/
+- https://www.hp.com/us-en/printers/3d-printers/learning-center/3d-printed-joint-design.html
+
+TL;dr:
+- Use gyroid infill with an infill density of between 50-80% for structural prints
+- Use PLA with a very slow speed, low layer height, and minimal/no cooling
+- Use dovetail joints of scale defined in the HP article
+- Anneal the print at 110c for ~30 minutes depending on the size and shape of the object