diff --git a/IT/RouterOS port forwarding.md b/IT/RouterOS port forwarding.md
index 0c1e9e0..5eea73b 100644
--- a/IT/RouterOS port forwarding.md	
+++ b/IT/RouterOS port forwarding.md	
@@ -1,7 +1,7 @@
 To port forward with RouterOS, you need allow the port through the firewall, *and* actually forward traffic
 # Allow through the firewall
 1. Navigate to IP > Firewall from the sidebar, then go to the Filter Rules tab from the top
-2. Select Add new
+2. Select `Add New` to create a new rule
 3. Set `Dst. Address` to the internal IP you want to allow traffic to
 4. Set `Protocol` to `6 (tcp)`
 5. Set `Dst. Port` to the port you want to allow traffic through
@@ -9,11 +9,12 @@ To port forward with RouterOS, you need allow the port through the firewall, *an
 7. Set `Action` to `accept`
 8. (Optionally) add a comment explaining what you're doing
 # Forward traffic
-1. Navigate to IP > Firewall  from the sidebar, then go to the FilteNAT, select `Add New`
-2. Set `Chain` to `dstnat`, set `Protocol` to `6 (tcp)`
-3. Set `Dst. Port` to the port you want to forward
-4. Set `In. Interface List` to `WAN`
-5. Set `Action` to `dst-nat`
-6. Set `To Addresses` to the internal IP you want the traffic to go to
-7. (Optionally) add a comment explaining what you're doing
+1. Navigate to IP > Firewall  from the sidebar, then go to the NAT tab from the top
+2. Select `Add New` to create a new rule
+3. Set `Chain` to `dstnat`, set `Protocol` to `6 (tcp)`
+4. Set `Dst. Port` to the port you want to forward
+5. Set `In. Interface List` to `WAN`
+6. Set `Action` to `dst-nat`
+7. Set `To Addresses` to the internal IP you want the traffic to go to
+8. (Optionally) add a comment explaining what you're doing